Chrome flat panel towel rail radiator 1100x450mm, Francis

The extra deep, flat panels on the Francis towel radiator are the perfect choice for the most design conscious bathrooms.

Key Features

• Low carbon steel, triple plated with copper, nickel, then 60 microns of chrome
• 5 year guarantee
• ISO9001:2000 registered manufacturer
• 12 horizontal rails divided into 3 sections of 3, 4, 5
• Tested to BS EN 442 standards
• Supplied with adjustable wall brackets, blanking plug and air vent plug
• Suitable for all central heating systems
• Safety tested at 15 bar pressure. The pressure in your home will normally be well under 5 bar

Heat Output

• BTU = 1634

Dimensions

• Distance from wall = 60mm
• Pipe centres = 400mm (the distance between the inlet and outlet pipe)
• Height = 1100mm
• Width = 450mm
• Download full dimensions PDF file

Long Lasting

You will be so impressed with the quality of the Francis towel rail that you will want to keep it looking this good.

To ensure longevity, the Francis towel rail has undergone a triple layer plating process.

Firstly, a layer of copper is applied to the low carbon steel, this greatly improves the bonding with the chrome.

Then 3 layers of Nickel are applied, forming a formidable barrier against rust.

Finally, 60 microns of chrome are added to complete the protection.


Mirror Finish

Not all chrome is the same.

The Francis towel radiator has been coated in 60 microns of chrome. Allowing for a highly reflective, mirror finish.

How do you tell the difference between poor chrome and great chrome? Place your finger on the chrome. On poor chrome your finger print will leave a mark, on great chrome you will be able to rub your finger print off.

The 60 microns of chrome on the Francis towel radiator means it easily passes the finger print test.


Will i need anything else to fit this radiator?

The Francis towel radiator comes with everything needed to fit it to your bathroom wall.

Before you can plumb in the Francis towel radiator you will need to buy a set of valves.

We sell a full range of valves, specifically for use with the Francis towel radiator. You will need angled valves if the pipes come out from the wall, straight valves if the pipes come out from the floor.

Take a look at our selection of towel radiator valves to find the design that suits you.


Product quick code:FR1100450

Guarantees:This product has a 5 year warranty

1 Review for this product

102 reviews for comparable products

Share your opinion - write a review!

You will need to log in before leaving a review