With it's modern styling, the Natasha towel rail is sure to make your bathroom the envy of your friends

Key Features

• Low carbon steel, triple plated with copper, nickel, then 60 microns of chrome
• 10 year guarantee
• All components use British standard fittings.
• ISO9001:2000 registered manufacturer
• 15 horizontal rails divided into 3 sections of 4, 5 and 6
• Tested to BS EN 442 standards
• Supplied adjustable wall brackets, blanking plug and air vent plug
• Suitable for any central heating systems
• This product can also be fitted with an electric dual fuel element
• Safety tested at 15 bar pressure. The pressure in your home will normally be well under 5 bar

Heat Output

• BTU = 943

Dimensions

• Distance from wall = adjustable from 60mm to 90mm
• Pipe centres = 450mm (the distance between the inlet and outlet pipe)
• Radiator height = 1100mm
• Radiator width = 500mm

 

Long Lasting 

You will be so impressed with the quality of the Natasha towel rail that you will want to keep it looking this good. 

To ensure longevity, the Natasha towel rail has undergone a triple layer plating process. 

Firstly, a layer of copper is applied to the low carbon steel, this greatly improves the bonding with the chrome. 

Then 3 layers of Nickel are applied, forming a formidable barrier against rust. 

Finally, 60 microns of chrome are added to complete the protection. 

Mirror Finish 

Not all chrome is the same. 

The Natasha towel radiator has been coated in 60 microns of chrome. Allowing for a highly reflective, mirror finish. 

How do you tell the difference between poor chrome and great chrome? Place your finger on the chrome. On poor chrome your finger print will leave a mark, on great chrome you will be able to rub your finger print off. 

The 60 microns of chrome on the Natasha towel radiator means it easily passes the finger print test. 

Will I need anything else to fit this radiator? 

The Natasha towel radiator comes with everything needed to fit it to your bathroom wall.  

Before you can plumb in the Natasha towel radiator you will need to buy a set of valves. 

We sell a full range of valves, specifically for use with the Natasha towel radiator. You will need angled valves if the pipes come out from the wall, straight valves if the pipes come out from the floor.  

Take a look at our selection of towel radiator valves to find the design that suits you.  

 

Guarantees:This product has a 10 year warranty

10 Reviews for this product

99 reviews for comparable products

Share your opinion - write a review!

Your Name