Cola - Bath mixer tap in chrome

Bring the cascades of the Cola de Caballo waterfall Mexico to your bathroom.

• Chrome plated solid brass
• Latest ceramic disc technology
• Adjustable tail stems allow adjusting pipe centre between 130mm - 180mm
• This tap can be mounted on the bath deck by getting a pair of pillars.
• Supplied complete with fittings (hoses & washers etcs)
• Minimum 0.5 bar water pressure required, though we recommend 1 bar for best performance.

No More Drips

Knowing the sound of dripping water can be used as a form of torture came as no surprise to us. This teeth clenching sound should not be allowed to poison the tranquility of your bathroom.

Because most taps drip when the rubber washers have started to wear out, we have taken the rubber washers out of our taps!

Instead, the Cola tap features the latest in ceramic disc technology.

All that is required is a 1/4 turn of your lever and the ceramic discs will close, forming an impenetrable seal. A 1/4 turn in the other direction and the water will be able to flow freely again.

Just think about how much time you will save now you no longer need to conjure all your strength to stop that maddening drip.


Long Lasting

You will be so impressed with the quality of the Cola tap that you will want to keep it looking this good.

To ensure it's longevity the Cola is made of solid brass.

Since brass does not corrode in water you will be able to enjoy the Cola for many years to come.


Mirror Finish

Not all chrome is the same.

The Cola tap has been coated in 40 microns of chrome. Allowing for a highly reflective, mirror finish.

How do you tell the difference between poor chrome and great chrome? Place your finger on the chrome. On poor chrome your finger print will leave a mark, on great chrome your finger print will disappear.

The 40 microns of chrome on the Cola tap means it easily passes the finger print test.


Enjoy lighter water

Small details make a huge difference.

And they do not come much smaller than the mesh which your water has to pass through, before it leaves the Cola tap.

This clever mesh separates the water, making it feel lighter.

You will instantly notice the difference, as it gives you a more gentle, pleasant experience whilst washing your hands.


Will it work in my bathroom?

For the Cola tap to operate, your water system will need to produce at least 0.5 Bar of pressure, though we recommend 1 bar for best performance.

This can be achieved if you have one of the following:

• Combination boiler systems
• Gravity fed systems (only with a pump)
• Megaflow system
• Pumped hot water systems
• Un-vented hot water systems
• Standard pressurised hot water cylinder type systems

Complete The Look

This Cola tap is only part of the full Cola range.

Get the complete look with the:

• Cola Basin Tap
• Cola Bidet Tap

Product quick code:W13

Guarantees:This product has a 12 month warranty