Summary: 200mm Round Stainless Steel Head & Handheld - Thermostatic Mixer Shower Kit
The round shower head and pencil handheld work with the shiny chrome finish giving this kit a charming look. Made with anti-corrosive materials this kit is sure to last you for years to come. It also comes with a built-in anti-scalding device pre-set at 42 degree which automatically shuts down in case the cold water supply fails.
Product Specification
| SKU: | SS9211 |
| Mixer Height: | 210mm |
| Mixer Width: | 120mm |
| Head Diameter: | 200mm |
| Projection Of Arm: | 400mm |
| Mixer Material: | Chrome plated solid brass |
| Head Material: | Stainless Steel |
| Outlets / Diverter Style: | 2 Way |
| Head Style: | Round |
| Shower Head Fitting: | Wall Mounted |
| Shower Arm Material: | Chrome plated solid brass |
| Minimum Pressure: | 0.2 BAR |
| Recommended Pressure: | 1 to 3 BAR |
| Flow Rate (at Minimum Pressure): | 3.2 L/min |
| Flow Rate (at Optimal Pressure): | 22 L/min |
Additional Information
| Includes: | Shower Arm (SA23) |
| Shower Head (SH114) | |
| Concealed Shower Mixer (SM516) | |
| Hand Held (SD402) | |
| Hose (SD90) | |
| Bracket (SC02) |
Please Note:
Working Requirements
Our thermostatic showers work on water systems that produce a minimum of 0.2 bar water pressure. This can be achieved by using one of the following systems:
- Combination boiler systems
- Gravity fed systems (only with a pump)
- Megaflow system
- Pumped hot water systems
- Un-vented hot water systems
- Standard pressurized hot water cylinder type systems
Temperature control cartridge: The included VERNET thermostatic control valve has its temperature pre-set at a maximum of 42 degree for extra safety. There is also an automatic shutdown function if cold water pressure should suddenly fail.
Check Valves: Neoperl check valves are included, which permit water to merely flow in one direction and prevent unwanted backflow of water in the opposite direction.
