Summary: 200mm Wall Mounted Round Brass Head & Handheld - Thermostatic Mixer Shower Kit
The dominating round shower head works in harmony with the round valves adding a sophisticated yet modern look to the whole unit. It is built with solid brass body and finished in highly reflective chrome layer. The solid metal built gives it strength and anti-corrosive nature, while the built-in anti-scalding device makes it safe to use. The handhled shower with a flexible shower hose gives you additional flexibility and functionality. Safety is ofcourse important to us. Our showers are fitted with high quality Vernet thermostatic control which is enabled with automatic shut down in case the cold water pressure fails, you can be assured that no water above 42 degree ever leaves your shower. Neoperl check valves ensure that water flows only flows in one direction preventing any backward flow. We also give you our standard free 10 year warranty on each order.
Product Specification
| SKU: | SS9206 |
| Mixer Height: | 210mm |
| Mixer Width: | 120mm |
| Head Diameter: | 200mm |
| Projection Of Arm: | 400mm |
| Mixer Material: | Chrome plated solid brass |
| Head Material: | Chrome plated solid brass |
| Outlets / Diverter Style: | 2 Way |
| Head Style: | Round |
| Shower Head Fitting: | Wall Mounted |
| Shower Arm Material: | Chrome Plated Stainless Steel |
| Minimum Pressure: | 0.2 BAR |
| Recommended Pressure: | 1 to 3 BAR |
| Flow Rate (at Minimum Pressure): | 3.2 L/min |
| Flow Rate (at Optimal Pressure): | 22 L/min |
Accreditations & Testing
| • WRAS approved flow cartridge |
Additional Information
| Includes: | Shower Arm (SA02) |
| Shower Head (SH22) | |
| Concealed Shower Mixer (SM516) | |
| Hand Held (SD402) | |
| Hose (SD90) | |
| Bracket (SC02) |
Please Note:
Working Requirements
Our thermostatic showers work on water systems that produce a minimum of 0.2 bar water pressure. This can be achieved by using one of the following systems:
- Combination boiler systems
- Gravity fed systems (only with a pump)
- Megaflow system
- Pumped hot water systems
- Un-vented hot water systems
- Standard pressurized hot water cylinder type systems
Temperature control cartridge: The included VERNET thermostatic control valve has its temperature pre-set at a maximum of 42 degree for extra safety. There is also an automatic shutdown function if cold water pressure should suddenly fail.
Check Valves: Neoperl check valves are included, which permit water to merely flow in one direction and prevent unwanted backflow of water in the opposite direction.
