Summary: 300mm Square Stainless Steel Head, Handheld, Riser & Bath Filler - Thermostatic Mixer Shower Kit
The sleek design and high reflective chrome surface of our 300mm Square Stainless Steel Head & Handheld adds an element of style and elegance to your shower. The riser rail with handheld and bath filler add extra functionality to this kit. This shower kit is long lasting and safe to use with the built-in anti-scalding device enabled with automatic shutdown.
Product Specification
SKU: | SS9357 |
Mixer Height: | 280mm |
Mixer Width: | 120mm |
Head Diameter: | 300mm |
Projection Of Head: | 150mm |
Mixer Material: | Chrome plated solid brass |
Head Material: | Stainless Steel |
Outlets / Diverter Style: | 3 Way |
Head Style: | Square |
Shower Head Fitting: | Ceiling Mounted |
Shower Arm Material: | Chrome plated solid brass |
Minimum Pressure: | 0.2 BAR |
Recommended Pressure: | 1 to 3 BAR |
Flow Rate (at Minimum Pressure): | 1.7 L/min |
Flow Rate (at Optimal Pressure): | 14 L/min |
Accreditations & Testing
• WRAS approved flow cartridge |
Additional Information
Includes: | Shower Arm (SA21) |
Shower Head (SH112) | |
Concealed Shower Mixer (SM527) | |
Hand Held (SD401) | |
Hose (SD90) | |
Bracket (SC03) | |
Riser (SR491) |
Please Note:
Working Requirements
Our thermostatic showers work on water systems that produce a minimum of 0.2 bar water pressure. This can be achieved by using one of the following systems:
- Combination boiler systems
- Gravity fed systems (only with a pump)
- Megaflow system
- Pumped hot water systems
- Un-vented hot water systems
- Standard pressurized hot water cylinder type systems
Temperature control cartridge: The included VERNET thermostatic control valve has its temperature pre-set at a maximum of 42 degree for extra safety. There is also an automatic shutdown function if cold water pressure should suddenly fail.
Check Valves: Neoperl check valves are included, which permit water to merely flow in one direction and prevent unwanted backflow of water in the opposite direction.