Basket
Summary: Thermostatic Mixer Shower Kit, 200mm Square Head & Handheld
The ultra-flat surfaces and straight lines work together to create a trendy yet practical style. It is strong, anti-corrosive and safe to use because of the in-built Vernet thermostatic device. Pre-set at 42 degree it prevents any water hotter than this to leave the shower. Should your cold water supply ever fail, it automatically shuts down preventing any burns due to scalding. When you buy this kit you also get a free 10 Year warranty.
Product Specification
| SKU: | SS9258 |
| Mixer Height: | 210mm |
| Mixer Width: | 120mm |
| Head Diameter: | 200mm |
| Projection Of Head: | 150mm |
| Mixer Material: | Chrome plated solid brass |
| Head Material: | Chrome Plated Plastic |
| Outlets / Diverter Style: | 2 Way |
| Head Style: | Square |
| Shower Head Fitting: | Ceiling Mounted |
| Shower Arm Material: | Chrome plated solid brass |
| Minimum Pressure: | 0.2 BAR |
| Recommended Pressure: | 1 to 3 BAR |
| Flow Rate (at Minimum Pressure): | 2.2 L/min |
| Flow Rate (at Optimal Pressure): | 16 L/min |
Accreditations & Testing
| • WRAS approved flow cartridge |
Additional Information
| Includes: | Shower Arm (SA21) |
| Shower Head (SH4103) | |
| Concealed Shower Mixer (SM526) | |
| Hand Held (SD401) | |
| Hose (SD90) | |
| Bracket (SC01) |
Please Note:
Working Requirements
Our thermostatic showers work on water systems that produce a minimum of 0.2 bar water pressure. This can be achieved by using one of the following systems:
- Combination boiler systems
- Gravity fed systems (only with a pump)
- Megaflow system
- Pumped hot water systems
- Un-vented hot water systems
- Standard pressurized hot water cylinder type systems
Temperature control cartridge: The included VERNET thermostatic control valve has its temperature pre-set at a maximum of 42 degree for extra safety. There is also an automatic shutdown function if cold water pressure should suddenly fail.
Check Valves: Neoperl check valves are included, which permit water to merely flow in one direction and prevent unwanted backflow of water in the opposite direction.
