Basket
Summary: Thermostatic Mixer Shower Kit, 254mm Round Head
When you buy a thermostatic mixer shower kit from Bathempire you can be assured that you're investing in a top quality shower in terms of both looks and performance. The stainless steel 254mm round shower head will look stunning in your shower enclosure or shower bath, while the triple chrome plated solid brass shiny handles on the mixer valve enhance the look and are easy to use, one controls the temperature while the other controls water flow. The single cast mixer body also provides a 20mm adjustment to provide a perfect fit for your wall type. To keep you safe this shower is fitted with high quality Vernet thermostatic valve and Neoperl check valves, the latter ensures there is no backward flow of water while the former prevents any water above 42 degree from leaving your shower. In case your cold water pressure fails, it automatically shuts down. The whole kit is covered by an astounding free 10 year warranty.
Product Specification
| SKU: | SS9113 |
| Mixer Height: | 210mm |
| Mixer Width: | 120mm |
| Head Diameter: | 254mm |
| Projection Of Arm: | 150mm |
| Mixer Material: | Chrome plated solid brass |
| Head Material: | Chrome Plated Plastic |
| Outlets / Diverter Style: | 1 Way |
| Head Style: | Round |
| Shower Head Fitting: | Ceiling Mounted |
| Shower Arm Material: | Chrome plated solid brass |
| Minimum Pressure: | 0.2 BAR |
| Recommended Pressure: | 1 to 3 BAR |
| Flow Rate (at Minimum Pressure): | 3.2 L/min |
| Flow Rate (at Optimal Pressure): | 22 L/min |
Accreditations & Testing
| • WRAS approved flow cartridge |
Additional Information
| Includes: | Shower Arm (SA20) |
| Shower Head (SH4102) | |
| Concealed Shower Mixer (SM515) |
Please Note:
Working Requirements
Our thermostatic showers work on water systems that produce a minimum of 0.2 bar water pressure. This can be achieved by using one of the following systems:
- Combination boiler systems
- Gravity fed systems (only with a pump)
- Megaflow system
- Pumped hot water systems
- Un-vented hot water systems
- Standard pressurized hot water cylinder type systems
Temperature control cartridge: The included VERNET thermostatic control valve has its temperature pre-set at a maximum of 42 degree for extra safety. There is also an automatic shutdown function if cold water pressure should suddenly fail.
Check Valves: Neoperl check valves are included, which permit water to merely flow in one direction and prevent unwanted backflow of water in the opposite direction.
