The extra deep, flat panels on the Francis electric towel radiator are the perfect choice for the most design conscious bathrooms.

Key Features

• Chrome plated - triple layer process
• Low carbon steel is used for all BathEmpire radiators
• 10 year warranty
• All components use British standard fittings.
• 100W thermostatic electric heater element with standard 15mm connection
• ISO9001:2008 registered manufacturer
• IP44 Rated
• Tested to BS EN 442 standards
• T Piece connection required for dual fuel radiator, available here
• Suitable for all central heating systems
• Safety tested at 15 bar pressure. The pressure in your home will normally be well under 5 bar

This radiator must be filled with a mixture of water and a rust inhibitor containing anti-freeze if used as a stand-alone electric radiator and not connected to the central heating system. 

This heating element kit is intended to be installed in a bathroom or shower-room. It is IP44 rated and may be installed in the zone 2 area, the electrical connection box should be located outside zone 2 and wired to an RCD protected spur. 

N.B: All electrical equipment must be installed by a qualified electrician. 

All electric radiators are designed for use in the United Kingdom. When using a normal element we suggest fitting in conjunction with a timer for best operation. Best operation is achieved when using in conjunction with an electronic timer. 

Heat Output

• BTU = 1629

Dimensions

• Distance from wall = 45 - 53mm
• Height = 800mm
• Width = 600mm
• Download full dimensions PDF file

 

Mirror Finish 

Not all chrome is the same. 

The Francis towel radiator has been coated in 60 microns of chrome. Allowing for a highly reflective, mirror finish. 

How do you tell the difference between poor chrome and great chrome? Place your finger on the chrome. On poor chrome your finger print will leave a mark, on great chrome you will be able to rub your finger print off. 

The 60 microns of chrome on the Francis towel radiator means it easily passes the finger print test. 

Will I need anything else to fit this radiator? 

The Francis towel radiator comes with everything needed to fit it to your bathroom wall.  

Before you can plumb in the Francis towel radiator you will need to buy a set of valves. 

We sell a full range of valves, specifically for use with the Francis towel radiator. You will need angled valves if the pipes come out from the wall, straight valves if the pipes come out from the floor.  

Take a look at our selection of towel radiator valves to find the design that suits you.  

1 Review for this product

This review is for a similar product: Francis Chrome Flat Panel Electric Towel Radiator - 800x450mm

This review is for a similar product: Francis Thermostatic Flat Panel Electric Towel Radiator - 1200x600mm

Share your opinion - write a review!

Your Name

BathEmpire.com can offer you finance to help with your purchase, click here for a quote and more information on finance options available.