Basket
Summary: Thermostatic Mixer Shower Kit, 200mm Round LED Head & Hand Held - Tamula Finest
Treat your bathroom to a dash of gorgeously illuminated style with our Tamula Finest thermostatic mixer shower kit. It is notable for its 200mm round LED shower head, while we ramp up the flexible usability of the set by providing you with a hand held head. The main head and the valve itself are manufactured from a clever combination of brass or stainless steel and chrome, which provides you with the type of enviable strength and shimmering finish you want from a thermostatic mixer. The valve is also extremely practical, providing you with an unbroken flow of perfectly heated water. What really catches the eye is the pressure-activated LEDs in the head, which go through blue, green and red to denote cold, warm and hot flows. These are completely hassle-free too, requiring no wiring to be installed. A shower arm and installation fittings are included, as is a free 10 year warranty on every Tamula Finest valve.
Product Specification
| SKU: | SB2020 |
| Guarantee: | 10 Years |
| Mixer Height: | 280mm |
| Mixer Width: | 130mm |
| Head Diameter: | 200mm |
| Mixer Material: | Chrome plated solid brass |
| Head Material: | Stainless Steel |
| Outlets / Diverter Style: | 2 Way |
| Head Style: | Round LED |
| Product Range: | Finest |
| Shower Head Fitting: | Wall Mounted |
| Hand Held Material: | Chrome Effect Plastic |
| Minimum Pressure: | 2 BAR |
| Recommended Pressure: | 2 to 5 BAR |
| Flow Rate (at Minimum Pressure): | 14.6 L/min |
| Flow Rate (at Optimal Pressure): | 21.1 L/min |
Accreditations & Testing
| • Safety tested at 7 bar |
Additional Information
| Includes: | Mixer Valve |
| Shower Head | |
| Shower Arm | |
| Hand Held Head | |
| Shower Hose | |
| Wall Connector and Bracket | |
| Fixtures and Fittings |
Please Note:
This product comes with a 10 Year Warranty as standard, although the mixer cartridges are covered by a separate 1 Year Manufacturer's Warranty.
Working RequirementsOur thermostatic showers work on water systems that produce a minimum of 1.0 bar water pressure. This can be achieved by using one of the following systems:
- Combination boiler systems
- Gravity fed systems (only with a pump)
- Megaflow system
- Pumped hot water systems
- Un-vented hot water systems
- Standard pressurized hot water cylinder type systems
